Timex Clock How To Set Time

TIMEX Dual Alarm Fm Clock Radio

What's in the Box

Controls Overview

Display

Backup Battery

Your new Timex Clock includes a born battery fill-in system that will maintain the time and alarm settings during a temporary power interruption. Remove the bombardment pull tab located on the bottom of the unit. When the Low Backup Battery Icon glows on the display, it is fourth dimension to the supersede the backup battery.

Keep unit of measurement continued to AC power when replacing the battery, or you will lose settings.
Utilize a Phillips screwdriver to open up the battery backup compartment door located on the bottom of the unit.
Remove exhausted battery and supersede with a fresh CR-2032 battery, making sure the '+' side is facing up.
Replace the battery compartment door. Practise non overtighten the spiral.

Production Care

A protective film is attached to the forepart of the display. It tin exist removed by peeling it off.
Place the unit on a level surface away from sources of straight sunlight or excessive heat.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A material or other protective material should exist placed between it and the furniture.
Stronger cleaning agents, such as Benzene, thinner or similar materials can harm the surface of the unit.

Prepare

Connecting to Power Source:
Connect the included Air conditioning adapter to the DC jack located on the back of the unit and connect the other cease to a working wall outlet.

Setting the Time

Press and concur the Fourth dimension Prepare Button.
Printing and release the Minus Button (-) repeatedly to conform the 60 minutes.Press and release the Plus Push button (+) repeatedly to adjust the minute.
NOTE: The PM indicator will light on the display when the hour is set for PM. There is no AM indicator.
Printing the Time Prepare Button to confirm settings.

Setting and Using Alarms

Printing and concord Alarm One OR Alarm Two. Each warning can be set in the aforementioned way.
Printing and release the Minus Push (-) as needed to adjust the hour.Press and release the Plus Button (+) as needed to adjust the minute.
Printing Alarm I or Alert Two to confirm the alarm fourth dimension.
Annotation: The PM indicator volition calorie-free on the brandish when the 60 minutes is set for PM. There is no AM indicator.
Press and release the Minus Button (-) or Plus Button (+) to select your wake to source: buzzer or radio. The or icon will light on the display to confirm your choice.
Printing Alarm One or Warning Two to confirm settings.

Slumber Mode

Press the Ability/Alert Reset Push to turn on FM radio.
Press and release the Minus Button (-) or Plus Push button (+) to select a radio station. (Printing and hold to quickly gyre through the stations.)
Printing the Slumber Mode Push repeatedly to select a sleep period betwixt 10-ninety minutes, or OFF.

Wireless Charging

Supports:

Qi compatible phones (as well works with plastic cases upwards to 3mm thick)
AirPods with wireless charging case
Identify Qi compatible device face up up on the wireless charging pad as pictured beneath:

Circumspection:
Remove metal protective or magnetic instance from phone before charging. When charging phone, practise not identify magnetic-striped or other metallic objects on the charger. Doing so could damage the object or this unit. Qi compatible phones with metallic looking finishes volition charge normally

Check the Wireless Charging Status LED Indicator to monitor charging condition:

Solid greenish LED: Device is charging.
Rapid blinking amber LED: Device is not charging properly. Reposition device.
Solid amber LED: Device fully charged.
Note: The LED indicator may continue to glow solid green when iOS devices are fully charged. The LED indicator may alternate between solid green and flashing amber while charging AirPods.

Charging Devices via USB Port

You lot tin can also charge your devices via the USB port located on the dorsum of the unit.

To accuse devices:

Connect the standard size end of a USB cable (not included) to the USB port on the back of the unit.
Connect the other terminate to the charging port on your device.
(Brand sure the unit is plugged into a working outlet in order to charge devices.)

FM Radio and Presets

Press the Ability/Alarm Reset Button to plow on FM radio.
Press and release the Minus Push button (-) or Plus Button (+) to select a radio station.(Press and agree to speedily scroll through the stations.)

Make sure the antenna is extended for best reception.
HOW TO Plan FM RADIO PRESETS
You can store upwardly to 10 FM presets by following these steps:

Press the Power/Alarm Reset Button to plough on FM radio.
Press and release the Minus Button (-) or Plus Button (+) to select a radio station. (Press and hold to quickly gyre through the stations.)
Printing and concord the Time Prepare/FM Presets Button. The display volition flash.
Press and release the Minus Button (-) or Plus Button (+) to cull a preset position betwixt P01-P10.
Press the Fourth dimension Ready/FM Presets Push button once more to ostend the preset station.
Repeat steps 2-five to gear up to ten preset stations.
When listening to FM radio, repeatedly press the Fourth dimension Set/FM Presets Push button to access your stored stations.

Troubleshooting

The unit does not power ON.
The unit of measurement is not connected to AC outlet, the Air-conditioning outlet has no ability, or is controlled by a wall switch that is "OFF". Cheque Air conditioning outlet and wall switch.
Alarm does not come on.
The alarm fourth dimension AM or PM incorrectly set, Alarm was OFF, etc. Bank check alert settings.
Unit shuts "Off" unexpectedly.
a. A power surge has occurred, or the AC outlet has been asunder.
b. The AC outlet may be controlled past a wall switch that is turned OFF. Check Air conditioning outlet or wall switch.

Important Rubber INSTRUCTIONS

Delight heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

Do not utilize this production near water, and clean only with dry fabric.
Do not block whatever ventilation openings. Install in accordance with the manufacturer's instructions.
Rut – This product should exist situated away from heat sources such equally radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
Just use attachments/accessories specified by the manufacturer.
Unplug this product during lightning storms or when unused for long periods of time.
Damage Requiring Service – This production should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to pelting. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in functioning or does non operate unremarkably.
No naked flame sources, such as lighted candles, should be placed on this product.
Attention should be drawn to the ecology aspects of bombardment disposal.
This production is suitable for use in tropical and/or moderate climates.
WARNING: To reduce the take chances of fire or electric shock, practice non expose this product to pelting or moisture.
Practise not dispose of batteries in the household trash or burn down.
The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.

WARNING:

Do not ingest the battery, Chemical Fire Risk. This product contains a coin/button prison cell battery. If the coin/button cell battery is swallowed, information technology tin crusade severe internal burns in just ii hours and tin pb to death.
Keep new and used batteries away from children. If the bombardment compartment does not close deeply, end using the product and proceed it abroad from children. If you call up batteries might accept been swallowed or placed inside whatsoever part of the body, seek immediate medical attention."
CAUTION – Run a risk OF EXPLOSION IF BATTERY IS REPLACED BY AN Wrong Blazon. DISPOSE OF USED BATTERIES Co-ordinate TO THE INSTRUCTIONS.

FCC Data

This equipment complies with FCC RF radiation exposure limits gear up forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is discipline to the following two conditions:

This device may non cause harmful interference, and (ii) this device must have whatsoever interference received, including interference that may crusade undesired operation.

Alert: Changes or modifications to this unit non expressly approved by the party responsible for compliance could void the user'southward authority to operate the equipment.
Annotation: This equipment has been tested and establish to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may crusade harmful interference to radio communications.

Even so, there is no guarantee that interference will not occur in a item installation. If this equipment does cause harmful interference to radio or boob tube reception, which can be determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference by one or more than of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/Television technician for help.

This equipment should be installed and operated with minimum distance 20cm betwixt the radiator & your body.

IC Statement

This equipment complies with IC RSS-102 radiation exposure limits prepare forth for an uncontrolled environment.
This device contains licence-exempt transmitter(due south)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
Operation is field of study to the following ii conditions:

This device may not crusade interference.
This device must accept any interference, including interference that may cause undesired functioning of the device.

The device comply with ISEDC RF exposure requirement, users tin can obtain Canadian data on RF exposure and compliance.

This equipment should exist installed and operated with a minimum distance of 20 cm betwixt the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user'southward dominance to operate the equipment.

Express 90 Day Warranty Information

Timex Sound Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to exist complimentary from defects in workmanship and materials, under normal utilize and conditions, for a period of ninety (90) days from the date of original purchase.

Should this product fail to office in a satisfactory style, it is best to first render it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, supersede this product without charge. This decision is subject to verification of the defect or malfunction upon commitment of this product to the Manufacturing plant Service Center authorized by Customer Service.

If service is required, please visit timexaudio.com/support for more data. A copy of the sales receipt is required to validate in-warranty coverage.
Disclaimer of Warranty

NOTE: This warranty is valid but if the product is used for the purpose for which it was designed. Information technology does not comprehend

products which take been damaged past negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons;
croaky or broken cabinets, or units damaged by excessive heat;
damage to digital media players, CD's or record cassettes (if applicable);
the cost of aircraft this production to the Factory Service Center and its render to the owner.

This warranty is valid just in the United states and does non extend to owners of the product other than to the original purchaser. In no event will SDI or whatsoever of its affiliates, contractors, resellers, their officers, directors,shareholders, members or agents be liable to yous or any third party for whatever consequential or incidental damages, whatever lost profits, actual, exemplary or punitive damages. (Some states do not let limitations on implied warranties or exclusion of consequential damages, and so these restrictions may not employ to you.) This warranty gives yous specific legal rights, and you lot may also accept other rights which vary from land to land. Your acknowledgment and understanding to fully and completely bide past the above mentioned disclaimer of warranty is contractually binding to yous upon your transfer of currency (money order, cashier's check, or credit carte) for purchase of your SDI product.
© 2022 SDI Technologies, Inc. All rights reserved
Questions? Visit www.timexaudio.com
TIMEX is a registered trademark of Timex Corporation in the United States and other countries

Documents / Resources

References

Source: https://manuals.plus/timex/dual-alarm-fm-clock-radio-manual